Solid State Drive - HP Z VR Backpack G1 Maintenance And Service Manual

Solid state drive

Description
256 GB, M2, PCIE, NVME, TLC
512 GB, M2, PCIE, NVME, TLC
1 TB, M2, PCIE, NVME, TLC
Follow these steps to remove the solid state drive (SSD):
1. Shut down the computer. If you are unsure whether the computer is off or in hibernation, turn the
computer on, then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the top cover (see
5. Remove the fans (see
6. Remove the antenna (see
7. Remove the battery (see
8. Peel back and lift the Mylar from the SSD.
9. Remove the phillips screw securing the SSD (1) and remove the SSD (2).
Reverse this procedure to install the SSD.
20 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Top Cover on page 14).
Fans on page 16).
Antennas on page 18).
Battery on page 19).
Spare part number
L03121-001
L03122-001
L03123-001