Table Of Warnings - 3M -MATIC 8000a-T Instructions Manual

3-SAFETY (continued)

3.3 Table of Warnings

WARNING
• To reduce the risk associated with
mechanical and electrical hazards:
− Read, understand, and follow all safety
and operating instructions before
operating or servicing the case sealer.
− Allow only properly trained and
qualifi ed personnel to operate and
service this equipment.
WARNING
• To reduce the risk associated with
hazardous voltage:
− Position electrical cord away from foot
and vehicle traffi c.
WARNING
• To reduce the risk associated with
pinches, entanglement and
hazardous voltage:
− Turn electrical supply off and
disconnect before performing any
adjustments, maintenance or
servicing the machine or taping heads.
WARNING
To reduce the risk associated with
•
pinches and entanglement hazards:
− Do not leave the machine running
while unattended.
− Turn the machine off when not in use.
− Never attempt to work on any part of
the machine, load tape, or remove
jammed boxes from the machine while
the machine is running.
8000a-8000a3 - NA
Figure 3-2
Figure 3-3
Figure 3-4
Important! Cavity in the conveyor bed. Never put your
hands inside any part of the machine while
it is working. Serious injury may occur
(Figure 3-4).
6
2014 June