Adding The Gear Oil - Husqvarna TC 65 2022 Owner's Manual

16 SERVICE WORK ON THE ENGINE
16.3
102
M01559-10

Adding the gear oil

Info
Too little gear oil or poor-quality gear oil results in premature wear to the transmission.
E00535-10
M01559-10
Info
Too little gear oil or poor-quality gear oil results in pre-
mature wear to the transmission.
–
2
Remove filler plug with the O-ring, and fill up with gear oil.
Gear oil
–
Mount and tighten the filler plug together with the O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and
inhaling them may result in unconsciousness and
death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Start the engine and check for leaks.
Finishing work
–
Check the gear oil level. (
Preparatory work
–
Stand the motorcycle upright on a horizontal surface.
Main work
–
1
Remove screw .
–
2
Remove filler plug with the O-ring.
–
Add gear oil until it flows out of the hole of the gear oil level
plug.
Engine oil (15W/50) (
–
Mount and tighten screw
Guideline
Screw, gear oil level
monitoring
–
Mount and tighten filler plug
0.50 l Engine oil (15W/50)
(0.53 qt.) ( p. 117)
p. 101)
p. 117)
1
.
M6 6 Nm (4.4 lbf ft)
2
with the O-ring.