10 TUNING THE CHASSIS
10.14
10.15
38
Adjusting the rebound damping of the fork
Info
The hydraulic rebound damping determines the fork suspension behavior.
F02246-10
Handlebar position
C00248-10
When disconnecting, excess pressure will escape from
the hose – the fork leg does not lose any air.
The fork pump airpump switches off automatically after
80 seconds.
–
Mount the protection cap.
Info
Only mount the protection cap by hand.
Finishing work
–
Remove the motorcycle from the lift stand. (
–
1
Turn adjuster
clockwise all the way.
Info
1
Adjuster
is located at the upper end of the right
fork leg.
–
Turn counterclockwise by the number of clicks correspond-
ing to the fork type.
Guideline
Rebound damping
Comfort
Standard
Sport
Info
Turn clockwise to increase the damping; turn
counterclockwise to reduce damping when the shock
absorber rebounds.
On the upper triple clamp, there are 2 holes at a distance of
to each other.
15 mm (0.59 in)
A
Hole distance
The holes on the handlebar supports are placed at a distance
B
of
from the center.
3.5 mm (0.138 in)
B
Hole distance
The handlebar supports can be mounted in four different posi-
tions. This allows the handlebar to be mounted in the most com-
fortable position for the rider.
p. 40)
15 clicks
12 clicks
10 clicks
A