Husqvarna TC 65 2022 Owner's Manual page 98

14 COOLING SYSTEM
96
–
Remove screw
–
Completely drain the coolant.
–
Mount and tighten screw
Guideline
Drain plug, water
pump cover
E00540-10
–
Make sure that screw
–
Add coolant to level
Guideline
A
Distance
ator fins
Coolant
E00539-10
–
Move the vehicle into the position shown and secure it
against rolling away. Height difference
Guideline
Height difference
Info
For all of the air to be able to escape from the cooling
system, the vehicle must be raised at the front. If the
cooling system is poorly de-aerated, its cooling power
400677-11
will be reduced and the engine may overheat.
–
Return the vehicle to the horizontal position.
–
Add coolant to level
–
Mount the radiator cap.
Finishing work
–
Go for a short test ride.
–
Check the cooling system for leaks.
–
Check the coolant level. (
1
. Take off the radiator cap.
1
with a new seal ring.
M6 6 Nm (4.4 lbf ft)
1
is tightened.
A
.
10 mm (0.39 in)
above the radi-
0.55 l Coolant (
(0.58 qt.)
B
50 cm (19.7 in)
B
A
.
p. 93)
p. 117)
must be reached.