Mitsubishi MELSEC-Q Q Series User Manual page 55

4 SETUP AND PROCEDURES BEFORE OPERATION
Switches to offset/gain setting mode
Specifies channel where offset/gain setting will be made
Specifies channel where offset setting will be made
Specifies channel where gain setting will be made
Changes channel where offset/gain setting will be made
Registers offset/gain setting results to module
Switches to normal mode
The program in the dotted area is a common program.
4 - 12
All manuals and user guides at all-guides.com
(a) When switching the mode using the dedicated instruction (G.OFFGAN)
The following program switches to the offset/gain setting mode with the
dedicated instruction (G.OFFGAN), changes the channel where offset/gain
setting will be made, writes the offset/gain values to the A/D converter
module, and then switches to the normal mode.
Processing in normal mode
MELSEC-Q
Stores setting of dedicated
instruction (G.OFFGAN) into D1.
Dedicated instruction (G.OFFGAN)
Stores channel where offset/
gain setting will be made into D0.
Specifies offset setting channel.
Sets 0 to buffer memory
address 23.
Specifies gain setting channel.
Sets 0 to buffer memory
address 22.
Turns ON channel change
request (YB).
Turns OFF channel change
request (YB).
Turns ON user range change
request (YA).
Turns OFF user range change
request (YA).
Stores setting of dedicated
instruction (G.OFFGAN) into D1.
Dedicated instruction (G.OFFGAN)
4 - 12