Appendix 2.2 Ogload - Mitsubishi MELSEC-Q Q Series User Manual

APPENDIX

Appendix 2.2 OGLOAD

Reads the offset/gain values of the user range setting of the A/D converter module to
the CPU.
Internal device
Set data
(System, user)
Bit Word
(S) —
(D)
[Instruction [Execution
symbol] condition]
G.OGLOAD
GP.OGLOAD
Device
Un Start I/O number of the module
(S) Start number of the device in which control data is stored.
Device that is turned ON 1 scan on completion of dedicated
(D) instruction processing.
(D) + 1 also turns ON at an abnormal completion.
Device
(S) System area
(S) + 1 Completion status
(S) + 2 Pass data classification setting
(S) + 3 System area
(S) + 4 CH1 Industrial shipment settings offset value
(S) + 5 CH1 Industrial shipment settings gain value
(S) + 6 CH2 Industrial shipment settings offset value
(S) + 7 CH2 Industrial shipment settings gain value
(S) + 8 CH3 Industrial shipment settings offset value
(S) + 9 CH3 Industrial shipment settings gain value
1 Set only the pass data classification setting (S)+2. If data is written to the area set by the system, the offset/gain values
will not be read properly.
App. - 6
All manuals and user guides at all-guides.com
Usable devices
MELSECNET/H
File Direct J \
register
Bit Word
Command
Command
Set data
Description
1
Control data
Item
Stores the status when the instruction
is complete.
0
Other than 0: Abnormal completion
Specify the voltage/current of the
offset/gain values to be read.
0: Voltage specified
1: Current specified
Special
Index
function
register
module
Z
U \G
—
—
G.OGLOAD Un
GP.OGLOAD Un
Setting range
0 to FE
Within the range of the
specified device
Within the range of the
specified device
of Q64AD (1/2)
Set data
—
: Normal completion
b15 b4 b3 b2 b1 b0
0 0 CH.4 CH.3 CH.2 CH.1
—
—
—
—
—
—
—
MELSEC-Q
Constant
Other
K, H S
— — —
— — —
(S) (D)
(S) (D)
Data type
Binary 16 bits
H
Device name
Bit
Setting range Set by
— —
— System
0000 to 000F User
H H
— —
— System
— System
— System
— System
— System
— System
App. - 6