Mitsubishi MELSEC-Q Q Series User Manual page 15

2 SYSTEM CONFIGURATION
2
2 - 2
All manuals and user guides at all-guides.com
(4) Compatibility with online module change
To make an online module change, use the module of function version C or later.
POINT
The products of function version C include the functions of the products of function
versions A and B.
(5) Software packages supported
Correspondence between systems which use A/D converter modules and
software packages are as shown below.
The GX Developer is necessary when using a A/D converter module.
Single PLC system
Q00J/Q00/Q01CPU
Multiple PLC system
Single PLC system
Q02/Q02H/Q06H/
Q12H/Q25HCPU
Multiple PLC system
Single PLC system
Q12PH/Q25PHCPU
Multiple PLC system
If installed in a MELSECNET/H remote I/O
station
4 Refer to Appendix 1.2 for the combinations of the A/D converter module functions and GX
Configurator-AD software versions.
Software Version
GX Configurator-AD
GX Developer
Version 1.10L or later
Version 7 or later
(cannot be used with the
SW0D5C-QADU-E 50F
Version 8 or later
or earlier versions).
SW0D5C-QADU-E 00A
Version 4 or later
SW0D5C-QADU-E 20C
Version 6 or later
Version 1.13P or later
(cannot be used with the
Version 7.10L or later
SW0D5C-QADU-E 50F
or earlier versions).
SW0D5C-QADU-E 50F
Version 6 or later
MELSEC-Q
4
or later
or later
or later
2 - 2