Table of Contents
Advertisement
The fireplace is designed to accept a gas line for connection to the
gas valve. Have the line installed by a qualified service person in
accordance with all building codes. Consult local building codes to
properly size the gas supply line leading to the connection of the
valve. The Commonwealth of Massachusetts requires that a flexible
appliance connector cannot exceed three feet in length.
Gas access holes are provided through the side panel(s) of the
fireplace. See Figure 18.
Check gas type. Use only the gas type indicated on the rating plate.
If the gas listed on the plate is not your type of gas supply, DO NOT
INSTALL. Contact your dealer for proper model.
Always use an external regulator to reduce the supply tank pressure
to a maximum of 10.5" w.c. (Natural), or 13" w.c. (Propane). See
page 10.
Connection directly to an unregulated Propane Tank. Can
cause explosion.
Page 18
GAS LINE CONNECTION
WARNING
GAS LINE
ACCESS
HOLES
Figure 18
39813-1-0919
Advertisement
Table of Contents
