Bookmarking Frequently Connected Nodes Or Rooms; Bookmarking Nodes Or Rooms; Operating The Transceiver In Portable Hri Mode; Ft2D - Yaesu Wires-X Instruction Manual

Bookmarking frequently connected Nodes or Rooms

When you save (bookmark) node stations and rooms, they are displayed in the group window, so you can easily access
them.

Bookmarking Nodes or Rooms

1. Click on the node station or room you want to bookmark
in "Active node window" or "Active room window".
2. Right-click the selected "Node" or "Room" to display the
command list.
3. Click the [Add to Bookmark].

Operating the transceiver in Portable HRI Mode

You can make settings such as transceiver screen display in use in Portable HRI Mode and turning off the TX/BUSY
lamp.

FT2D

function
Switching between Access Point and Direct Operation
BACKTRACK screeen (compass screen)
Transmission sound monitor function on or off
SQL open
SQL level setting
Switching TX/RX LED on or off
Dimmer setting
Lamp setting
Change of the busy detection (noise squelch/DG - ID
number match)
key
Press the A/B key
Press the DISP key (Direct Operation only)
Press the V/M key (Direct Operation only)
Press the MONI key
Press the SQL key
Press and hold the V/M key
Press the BAND key
Press and hold DISP key
Press and hold the A/B key
37