Table of Contents
Advertisement
Spirit II User's Manual
Section 8: Internal Inova Console Option
Overview
This optional Inova system is designed to provide arc voltage control to any plasma
cutting system, however, combining it with the Spirit II provides the added convenience
of having Inova console built directly into the plasma power supply.
This section only covers topics unique to the Spirit II system with the internally installed
Inova console. See the standard Inova manual for all other Inova information.
Plug Identification
Connections for the internal Inova console option are distinguished from other
connections on the back of the power supply by the addition of the letter "I" before the
plug number. The function of each plug (e.g., IP1) is the same as the corresponding
plug found on the external Inova console (e.g., P1).
POSITIONER
CONSOLE #2
REMOTE
X/Y MACHINE
RS-422 IN
RS-422 OUT
Spirit II 150/275
Unique Interconnect Cables
Two unique interconnect cables are required for this option with the Spirit II system.
The FII cable is used to connect the Spirit II internal Inova console (IP4) to the X/Y
Machine (CNC controller). The JII cable is used to connect multiple Spirit II internal
Inova consoles (IP8). See the parts list in Section 7 for more details on these cables.
This information is subject to the controls of the Export Administration Regulations [EAR]. This information shall not be provided to
non-U.S. persons or transferred by any means to any location outside the United States contrary to the requirements of the EAR.
Section 8: Internal Inova Console Option
POSITIONER
CONSOLE #2
REMOTE
RS-422
RS-422
OUT
IN
8-1
X/Y
MACHINE
Spirit II 400
Advertisement
Table of Contents
Troubleshooting
