Table of Contents
Advertisement
ASSEMBLING CUTTERHEAD GUARD
Position cutterhead guard (A) Fig. 7, on top cover of machine. Align holes in cutterhead guard (A)
Fig. 7, with holes in top cover and fasten with six 12mm button head screws (B) and flat washers,
five of which are shown.
B
A
Fig. 7
ASSEMBLING DUST HOOD
A dust hood with a 5 opening is supplied with your machine and is to be used when con-
necting the planer to a dust collector or a central dust collection system.
Position dust hood (A) Fig. 8, against the rear of the machine and on top of cutterhead guard
(B). Align the holes and fasten the dust hood (A) Fig. 9, to the cutterhead guard (B) using seven
12mm button head screws (C) and flat washers, four of which are shown.
B
A
A
C
B
Fig. 8
Fig. 9
7
Advertisement
Table of Contents
