www.ti.com
Select
LOW
HIGH
4.11 MCAN
The Control Card is equipped with a single MCAN transceiver (TCAN1024H-Q1) that is connected to the
MCAN1 interface of the AM263x SoC. The MCAN0 interface of the AM263x SoC is mapped directly to the HSEC
connector.
SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023
Submit Document Feedback
Table 4-13. UART Mux Select Logic
Condition
LIN Selected
HSEC UART Selected
Figure 4-18. UART 1:2 MUX to HSEC
Figure 4-19. MCAN Transceiver
Copyright © 2023 Texas Instruments Incorporated
Hardware Description
Function
A→B1
A→B2
AM263x Control Card Hardware User's Guide
31