Table of Contents
Advertisement
Quick Links
www.ti.com
User's Guide
AM263x Control Card Hardware User's Guide
The AM263x Control Card Evaluation Module (EVM) is an evaluation and development board for the Texas
™
Instruments Sitara
AM263x series of microcontrollers (MCUs). This EVM provides an easy way to start
developing on the AM263x MCUs with on-board emulation for programming and debugging as well as buttons
and LED for a simple user interface. The control card also enables header pin access to key signals through the
use of a high speed edge connector (HSEC) baseboard docking station for rapid prototyping.
SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023
Submit Document Feedback
ABSTRACT
Copyright © 2023 Texas Instruments Incorporated
AM263x Control Card Hardware User's Guide
1
Advertisement
Table of Contents
Related Manuals for Texas Instruments AM263 Series
Summary of Contents for Texas Instruments AM263 Series
- Page 1 LED for a simple user interface. The control card also enables header pin access to key signals through the use of a high speed edge connector (HSEC) baseboard docking station for rapid prototyping. SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 AM263x Control Card Hardware User's Guide Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated...
-
Page 2: Table Of Contents
Figure 4-5. Oscillator Clock Tree............................... Figure 4-6. Crystal Clock Tree..............................Figure 4-7. QSPI Interface.................................21 Figure 4-8. Board ID EEPROM..............................22 AM263x Control Card Hardware User's Guide SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... - Page 3 , Texas Instruments ™ , E2E ™ , and Code Composer Studio ™ are trademarks of Texas Instruments. SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 AM263x Control Card Hardware User's Guide Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated...
-
Page 4: Preface: Read This First
1. Open the target configuration or create a new target configuration. 2. Click on the advanced tab to access advanced setup settings. 3. Click on Texas Instruments XDS110 USB Debug Probe_0 connection 4. Change the default setting for The JTAG TCLK Frequency (MHz) from "Fixed default 5.5-MHz frequency"... -
Page 5: Control Card Overview
Not included: • HSEC 180-pin Baseboard Docking Station • Standoffs • USB Type-C 5-V/3-A AC/DC supply and cable SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 AM263x Control Card Hardware User's Guide Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 6: Key Features
180 pin HSEC interface for rapid prototyping • On-board memory – 128 MB QSPI Flash – 1 MB I2C EEPROM AM263x Control Card Hardware User's Guide SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 7: Component Identification
Control Card Overview 2.3 Component Identification Figure 2-2. Component Identification SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 AM263x Control Card Hardware User's Guide Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 8: Hsec 180-Pin Control Card Docking Station
2.4 HSEC 180-pin Control Card Docking Station TMDSHSECDOCK 180-pin docking station is available for purchase through Texas Instruments. The docking station is a baseboard that enables rapid prototyping. There is a power switch on the docking station that determines whether power to the control card will be supplied by the 5V connector or USB connector. -
Page 9: Figure 3-1. Usb Type-C Power Delivery Classification
As a UFP, the port controller device detects and communicates the advertised current level of the DFP to the system through the OUT1 and OUT2 GPIOs. SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 AM263x Control Card Hardware User's Guide Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 10: Figure 3-2. Type-C Cc Configuration
Power indicator for voltage -VSYS_TA_3V3 VSYS_1V2 Power indicator for voltage - VSYS_1V2 XDS110_PROG_STAZ2 LED will glow after XDS configuration XDS110_PROG_STAZ1 AM263x Control Card Hardware User's Guide SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 11: Figure 3-3. Power Status Leds
Board Setup Figure 3-3. Power Status LEDs SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 AM263x Control Card Hardware User's Guide Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 12: Figure 3-4. E1 Power Tree Diagram Of Am263X Control Card
Figure 3-4. E1 Power Tree Diagram of AM263x Control Card In E2 of the Control Card, the TPS62826 and TPS54334 are both changed to be TPS62913. AM263x Control Card Hardware User's Guide SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 13: Push Buttons
The control card supports multiple user push buttons that provide reset inputs and user interrupts to the processor. Figure 3-6. Push Buttons SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 AM263x Control Card Hardware User's Guide Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 14: Boot Mode Selection
Secondary SBL also fails then boot from external host via UART interface. DevBoot No SBL. Used for development purposes only. Figure 3-7. SW3 Switch Positions AM263x Control Card Hardware User's Guide SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 15: Jtag Path Selection
JTAG path for the SoC. The following image shows proper switch position for SW5 for the two JTAG paths. Figure 3-8. JTAG Path Switch Position SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 AM263x Control Card Hardware User's Guide Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 16: Hardware Description
Hardware Description www.ti.com 4 Hardware Description 4.1 Functional Block Diagram Figure 4-1. AM263x Control Card Block Diagram AM263x Control Card Hardware User's Guide SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 17: Gpio Mapping
GPIO output from TA header to SoC 1.2V REG EN TA_GPIO2 PREFERABLE Enable control to 1.7V LDO LDO Enable VPP_LDO_EN High SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 AM263x Control Card Hardware User's Guide Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 18: Reset
PORz is the Power-On-Reset for the MAIN Domain. • WARMRESETn is the Warm Reset to MAIN Domain. Figure 4-3. PORz Reset Signal Tree AM263x Control Card Hardware User's Guide SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 19: Figure 4-4. Warmresetn Reset Signal Tree
V_GS of the PMOS to be less than zero and so the INTn signal connects to the PMOS drain which is tied directly to ground. SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 AM263x Control Card Hardware User's Guide Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 20: Clock
Mounted 25-MHz LVCMOS Oscillator (default) R161, R135 R158, R155, R134 25-MHz Crystal R158, R155, R134 R161, R135 AM263x Control Card Hardware User's Guide SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 21: Memory Interface
(R273) and mounting a pull up resistor (R268) to the 3.3 V IO voltage supply. SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 AM263x Control Card Hardware User's Guide Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 22: Ethernet Interface
LEDs for link and activity indication. Figure 4-9. RGMII1 Gigabit Ethernet PHY AM263x Control Card Hardware User's Guide SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 23: Figure 4-10. Rgmii1 Gigabit Ethernet Phy Strapping Resistors
RGMII to Copper RX_D3 RX_D2 LED_0 Auto-negotiation, 1000/100/10 advertised, auto MDI-X RX_ER LED_2 RX_DV Port Mirroring Disabled SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 AM263x Control Card Hardware User's Guide Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 24: Figure 4-11. Icssm Overview
10/100 (DP83826ERHBT) Mbps connectivity with integrated magnetic and LEDs for link and activity indication. Figure 4-11. ICSSM Overview AM263x Control Card Hardware User's Guide SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 25: Figure 4-12. Pru0 Icss Gigabit Ethernet Phy Strapping
Each functional pin has a default mode that is driven by an internal pull resistor. Figure 4-12. PRU0 ICSS Gigabit Ethernet PHY Strapping Resistors SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 AM263x Control Card Hardware User's Guide Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 26: Figure 4-13. Pru1 Icss Industrial Ethernet Phy Strapping Resistors
Each functional pin has a default mode that is driven by an internal pull resistor Figure 4-13. PRU1 ICSS Industrial Ethernet PHY Strapping Resistors AM263x Control Card Hardware User's Guide SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 27: Table 4-7. Pru1 Icss Industrial Ethernet Phy Strapping Resistors
Ethernet PHY power established Yellow Transmit or Receive activity Left LED Green Link OK Yellow 1000BT link is up SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 AM263x Control Card Hardware User's Guide Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 28: Figure 4-14. I2C Instances Tree
It is important that all I2C data and clock lines are pulled up to the 3.3V IO voltage supply to enable communication. Figure 4-14. I2C Instances Tree AM263x Control Card Hardware User's Guide SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 29: Industrial Application Leds
LEDs and it has an I2C address of 0x60. Figure 4-15. Industrial Application LED Driver SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 AM263x Control Card Hardware User's Guide Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 30: Spi
AM263x SoC to the HSEC connector. To make use of UART1, the select line of a 1:2 mux must be high. The select line is driven by a GPIO signal (LIN_MUX_SEL) that is sourced from the IO expander. AM263x Control Card Hardware User's Guide SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 31: Mcan
MCAN1 interface of the AM263x SoC. The MCAN0 interface of the AM263x SoC is mapped directly to the HSEC connector. Figure 4-19. MCAN Transceiver SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 AM263x Control Card Hardware User's Guide Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 32: Fsi
The AM263x Control Card includes an XDS110 class on-board emulator. The control card also has the option to map the JTAG signals from the AM263x SoC to the HSEC connector. Figure 4-21. JTAG AM263x Control Card Hardware User's Guide SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 33: Figure 4-22. Jtag Path Switch
Control Card is removed. The XDS110 controls two power status LED's. For more information refer to Power Status LED's. SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 AM263x Control Card Hardware User's Guide Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 34: Test Automation Header
PORz, warm reset, and bootmode control. Figure 4-23. Test Automation Header AM263x Control Card Hardware User's Guide SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 35: Lin
Table 4-15. LIN MUX Select Logic Select Logic Condition Function LIN Selected A→B1 HIGH HSEC UART Selected A→B2 SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 AM263x Control Card Hardware User's Guide Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 36: Mmc
Inline ESD protection is provided for the MMC signals in the form of a six channel transient voltage suppressor device (TPD6E001RSER). AM263x Control Card Hardware User's Guide SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 37: Adc And Dac
HSEC connector. All ADC signals are ESD protected (TPD4E001DBVR). Figure 4-26. ADC HSEC Connections SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 AM263x Control Card Hardware User's Guide Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 38: Figure 4-27. Adc Switch Routing
DAC VREF Switch Position Reference Selection Pin 1-2 AM263x on-die LDO Pin 2-3 Output of VREF Switch AM263x Control Card Hardware User's Guide SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 39: Table 4-21. Adc Vref Switch
OPEN - Allow for reference to be AM263x on-die LDO reference Pin 5-6 Output of VREF Switch SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 AM263x Control Card Hardware User's Guide Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 40: Pinmux Mapping
ADC3_AIN3 ADC3_AIN4 ADC3_AIN4 ADC3_AIN5 ADC3_AIN5 ADC4_AIN0 ADC4_AIN0 ADC4_AIN1 ADC4_AIN1 ADC4_AIN2 ADC4_AIN2 ADC4_AIN3 ADC4_AIN3 ADC4_AIN4 ADC4_AIN4 ADC4_AIN5 ADC4_AIN5 AM263x Control Card Hardware User's Guide SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... - Page 41 SPI4_CLK GPIO130 EQEP0_A SDFM1_CLK0 EQEP0_B UART4_CTSn SPI4_CS0 GPIO131 EQEP0_B SDFM1_D0 EQEP0_INDEX UART4_RXD LIN4_RXD SPI4_D1 GPIO133 EQEP0_INDEX SDFM1_D1 SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 AM263x Control Card Hardware User's Guide Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated...
- Page 42 PR0_PRU0_ RGMII2_TD2 MII2_TXD2 EPWM29_A GPMC0_A9 GPIO101 GPO13 GPIO13 PR0_PRU0_ PR0_PRU0_ RGMII2_TD3 MII2_TXD3 EPWM29_B GPMC0_A10 GPIO102 GPO14 GPIO14 AM263x Control Card Hardware User's Guide SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated...
- Page 43 GPMC0_A12 GPIO108 GPIO4 PR0_PRU1_GPO5 PR0_PRU1_ TRC_DATA0 EPWM30_A GPMC0_OEn_REn GPIO103 GPIO5 PR0_PRU1_GPO6 PR0_PRU1_ FSITX2_CLK TRC_DATA4 GPMC0_A11 GPIO107 GPIO6 SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 AM263x Control Card Hardware User's Guide Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated...
- Page 44 UART4_RXD LIN4_RXD XBAROUT2 FSIRX0_CLK GPIO16 SPI1_CS0 SPI1_CS0 UART4_TXD LIN4_TXD XBAROUT1 GPIO15 SPI1_D0 SPI1_D0 UART5_TXD XBAROUT3 FSIRX0_DATA0 GPIO17 AM263x Control Card Hardware User's Guide SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated...
- Page 45 EPWM16_A GPMC0_AD6 GPIO75 UART1_TXD UART1_TXD LIN1_TXD EPWM16_B GPMC0_AD7 GPIO76 VSYS_MON VSYS_MON WARMRSTN WARMRSTn XTAL_XI XTAL_XI XTAL_XO XTAL_XO SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 AM263x Control Card Hardware User's Guide Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated...
-
Page 46: Hsec Pinout
EQEP1_B 70 XBAROUT14/GPMC0_WAIT1/GPIO120/EQEP1_B SPI0_CLK SPI0_CLK/UART3_TXD/LIN3_TXD/FSITX0_CLK/GPIO12/SOP2 SDFM0_CLK0/CLKOUT1/GPIO122/EQEP1_STROBE EQEP1_STROBE 72 SPI0_CS0 SPI0_CS0/UART3_RXD/LIN3_RXD/GPIO11 EXT_REFCLK0/XBAROUT15/GPIO121/EQEP1_INDEX EQEP1_INDEX 74 SPI1_D0 SPI1_D0/UART5_TXD/XBAROUT3/FSIRX0_DATA0/GPIO17 LIN1_RXD/UART1_RXD/SPI2_CS0/XBAROUT5/GPIO19 UART1_RXD 76 AM263x Control Card Hardware User's Guide SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... - Page 47 135 GND NC 136 137 ICSS_MII1_RXER PR0_PRU1_GPO5/TRC_DATA0/EPWM30_A/GPMC0_OEn_REn/GPIO103 PR0_PRU1_GPO9/PR0_UART0_RXD/TRC_DATA1/EPWM30_B/ ICSS_MII1_COL 138 GPMC0_BE0n_CLE/GPIO104 139 ICSS_MII1_CRS PR0_PRU1_GPO10/PR0_UART0_TXD/TRC_DATA2/EPWM31_A/GPMC0_BE1n/ PR0_PRU1_GPO8/TRC_DATA3/EPWM31_B/GPMC0_WEn/GPIO106 ICSS_MII1_RXLINK 140 GPIO105 SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 AM263x Control Card Hardware User's Guide Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated...
- Page 48 173 NC NC 174 175 NC NC 176 177 NC NC 178 179 GND HSEC_5V0 HSEC_5V0 180 AM263x Control Card Hardware User's Guide SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated...
-
Page 49: Table 4-24. E2 Hsec Pinout
EQEP1_B 70 XBAROUT14/GPMC0_WAIT1/GPIO120/EQEP1_B SPI0_CLK SPI0_CLK/UART3_TXD/LIN3_TXD/FSITX0_CLK/GPIO12/SOP2 SDFM0_CLK0/CLKOUT1/GPIO122/EQEP1_STROBE EQEP1_STROBE 72 SPI0_CS0 SPI0_CS0/UART3_RXD/LIN3_RXD/GPIO11 EXT_REFCLK0/XBAROUT15/GPIO121/EQEP1_INDEX EQEP1_INDEX 74 SPI1_D0 SPI1_D0/UART5_TXD/XBAROUT3/FSIRX0_DATA0/GPIO17 LIN1_RXD/UART1_RXD/SPI2_CS0/XBAROUT5/GPIO19 UART1_RXD 76 SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 AM263x Control Card Hardware User's Guide Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... - Page 50 135 GND NC 136 137 ICSS_MII1_RXER PR0_PRU1_GPO5/TRC_DATA0/EPWM30_A/GPMC0_OEn_REn/GPIO103 PR0_PRU1_GPO9/PR0_UART0_RXD/TRC_DATA1/EPWM30_B/ ICSS_MII1_COL 138 GPMC0_BE0n_CLE/GPIO104 139 ICSS_MII1_CRS PR0_PRU1_GPO10/PR0_UART0_TXD/TRC_DATA2/EPWM31_A/GPMC0_BE1n/ PR0_PRU1_GPO8/TRC_DATA3/EPWM31_B/GPMC0_WEn/GPIO106 ICSS_MII1_RXLINK 140 GPIO105 AM263x Control Card Hardware User's Guide SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated...
- Page 51 173 NC NC 174 175 NC NC 176 177 NC NC 178 179 GND HSEC_5V0 HSEC_5V0 180 SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 AM263x Control Card Hardware User's Guide Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated...
-
Page 52: References
(PRU-ICSS): Added important usage note about PR_RGMII singal mapping..........• (HSEC Pinout): Corrected ADC input mapping for E2 HSEC pinout..............0 AM263x Control Card Hardware User's Guide SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 53: A E2 Design Changes
Select Line Condition Function LIN Selected A->B1 port HIGH HSEC UART Selected A->B2 port Figure A-1. LIN PHY SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 AM263x Control Card Hardware User's Guide Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 54: Table A-3. E2 Termination Resistor Location Table
E2 Signal DAC_OUT ADC0_AIN0/DAC_OUT ADC0_AIN0_P ADC0_AIN1/DAC_OUT ADC0_AIN0_n ADC1_AIN0 ADC0_AIN1_p ADC1_AIN1 ADC0_AIN1_n ADC0_AIN2 ADC0_AIN2_p ADC0_AIN3 ADC0_AIN2_n ADC1_AIN2 ADC1_AIN0_p ADC1_AIN3 AM263x Control Card Hardware User's Guide SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 55: Table A-6. E1 Adc Channel Signals
AIN4 AIN5 ADC2 AIN0 AIN1 AIN2 AIN3 ADC3 AIN0 AIN1 AIN2 AIN3 AIN4 AIN5 ADC4 AIN0 AIN1 SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 AM263x Control Card Hardware User's Guide Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... -
Page 56: Table A-8. E2 Hsec Mux Table
HSEC_ADC2_AIN1_P U38.6 HSEC_ADC3_AIN2 U30.1 HSEC_ADC2_AIN2_P U39.1 HSEC_ADC3_AIN4 U30.2 U39.2 U30.3 HSEC_ADC2_AIN2_N U39.3 HSEC_ADC3_AIN5 U30.4 HSEC_ADC3_AIN0_N U39.4 HSEC_ADC2_AIN3 AM263x Control Card Hardware User's Guide SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated... - Page 57 U31.2 U40.2 U31.3 HSEC_ADC3_AIN1_N U40.3 HSEC_ADC1_AIN3 U31.4 HSEC_ADC3_AIN2_P U40.4 HSEC_ADC1_AIN4 U31.5 VDDA_IO_1V8 U40.5 VDDA_IO_3V3 U31.6 U40.6 HSEC_ADC1_AIN5 SPRUJ09C – MARCH 2022 – REVISED FEBRUARY 2023 AM263x Control Card Hardware User's Guide Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated...
- Page 58 STANDARD TERMS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, and/or documentation which may be provided together or separately (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms set forth herein.
- Page 59 www.ti.com Regulatory Notices: 3.1 United States 3.1.1 Notice applicable to EVMs not FCC-Approved: FCC NOTICE: This kit is designed to allow product developers to evaluate electronic components, circuitry, or software associated with the kit to determine whether to incorporate such items in a finished product and software developers to write software applications for use with the end product.
- Page 60 www.ti.com Concernant les EVMs avec antennes détachables Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à...
- Page 61 www.ti.com EVM Use Restrictions and Warnings: 4.1 EVMS ARE NOT FOR USE IN FUNCTIONAL SAFETY AND/OR SAFETY CRITICAL EVALUATIONS, INCLUDING BUT NOT LIMITED TO EVALUATIONS OF LIFE SUPPORT APPLICATIONS. 4.2 User must read and apply the user guide and other available documentation provided by TI regarding the EVM prior to handling or using the EVM, including without limitation any warning or restriction notices.
- Page 62 Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief in any United States or foreign court. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2023, Texas Instruments Incorporated...
- Page 63 TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products. TI objects to and rejects any additional or different terms you may have proposed. IMPORTANT NOTICE Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2023, Texas Instruments Incorporated...