Editing Onto Another Tape - Sony DVCAM DSR-200P Operating Instructions Manual

Editing onto another tape

You can create your own video programmes by editing with any other VCRs that has
video/audio inputs. Note that cassette memory data is not recorded on the edited tape.
You can edit with little deterioration of picture and sound quality when using the DV
connecting cable (not supplied). Data code of the source tape is dubbed on the edited
tape at the same time.
Before editing
Connect DV OUT of the digital camcorder and the DV IN (or DV IN/OUT) jack of the
VCR using the VMC-2DV DV connecting cable (not supplied).
Use this digital camcorder as a player.
Notes on editing using the DV connecting cable
• Depending on signal conditions, DVCAM-formatted tapes may not be able to edit
using the DV connecting cable. Edit using the supplied A/V connecting cable in this
case.
• You can connect one VCR only.
• If you edit playback pause picture, the edited picture becomes rough.
• Connect a LANC cable (not supplied) to control this digital camcorder from the
recording VCR.
To connect the VCR without DV IN jack
Connect the digital camcorder to the VCR using the supplied A/V connecting cable.
Set the TV/VCR input selector on the VCR to LINE.
If your VCR is a monaural type, connect only the white plug for audio on both the
digital camcorder and the VCR. With this connection, the sound is monaural.
74
Recorder with DV IN
DV OUT
VMC-2DV
: Signal flow
DSR-200P CE 3-858-622-12(1). E
DV IN