Sony DVCAM DSR-200P Operating Instructions Manual page 72

Searching the recorded picture
Searching the recorded picture without using cassette memory
(1) Set the POWER switch to ON, then set CAMCORDER/PLAYER to PLAYER.
(2) Open the cover, press MENU to display the menu in the viewfinder.
(3) Set CM SEARCH to OFF in the menu system.
(4) Press MENU to erase the menu display.
(5) Press SEARCH MODE on the Remote Commander to select date search (search
with the date) or photo search (search the photo-recorded pictures only).
(6) On the Remote Commander, press
backward.
Each time you press
To stop searching
Press π .
If your tape has blank portions between pictures
The digital camcorder may not search for the recorded picture or data may not be
stored.
Notes on searching
• The digital camcorder may not search correctly if the beginning of the search portion
is too close to the tape head position.
• When you use date search, the digital camcorder plays back the search picture, and
when you use photo search, the digital camcorder enters playback pause when it
finds the point it was searching for.
72
+ to search forward or =
+ or = , the digital camcorder searches for the next scene.
DSR-200P CE 3-858-622-12(1). E
to search