Table of Contents
Advertisement
Trouble check
Picture
Symptom
The image on the viewfinder
screen is not clear.
A vertical band appears when
a subject such as lights or a
candle flame is shot against a
dark background.
A vertical band appears when
shooting a very bright subject.
The picture is "noisy" or
hardly visible.
v indicator flashes in the
viewfinder.
Battery remaining indicator
does not indicate full ı
when you insert a charged
battery pack.
While editing using the DV
connecting cable, recording
picture cannot be
monitored.
Others
Symptom
The supplied Remote
Commander does not work.
There is dust in the
viewfinder.
92
Cause and/or Corrective Action
• The viewfinder lens is not adjusted.
m Adjust the viewfinder lens. (p. 27)
• The contrast between the subject and background is too high.
The digital camcorder is not malfunctioning.
m Change locations.
• The digital camcorder is not malfunctioning.
• The video heads may be dirty.
m Clean the heads using the Sony DV-12CL cleaning cassette
(not supplied). (p. 86)
• The video heads may be dirty.
m Clean the heads using the Sony DV-12CL cleaning cassette
(not supplied). (p. 86)
• The ambient temperature is too low.
• The battery pack is completely dead, and cannot be
recharged.
m Use another battery pack. (p. 85)
• Remove the DV connecting cable, and connect it again.
• The player or the cassette is not DVCAM format.
Cause and/or Corrective Action
• COMMANDER is set to OFF in the menu system.
m Set it to VTR4 or ID. (p. 41)
• VTR4/ID/VTR2 on the Remote Commander is set to ID.
m Register the ID of the Remote Commander to the digital
camcorder. (p. 13)
• Something is blocking the infrared rays.
m Remove the obstacle.
• The batteries are not inserted with the correct polarity.
m Insert the batteries with the correct polarity. (p. 12)
• The batteries are dead.
m Insert new ones. (p. 12)
• To lift the viewfinder press PUSH and while holding, open
the viewfinder. Clean the viewfinder surface. (p.87)
DSR-200P CE 3-858-622-12(1). E
Advertisement
Table of Contents
