Editing Onto Another Tape - Sony Handycam CCD-TR42 Operation Manual

solidi are Molaicom\acel4al-) aml] or
You can create your own video program by editing with any other & 8 mm, HIB Hi8, VE VHS, SWS s-
VHS, VSI VHSC, S-VHSC, or (@ Betamax VCR that has video/audio inputs.
Before Editing
After connecting the camcorder to the VCR,
(1) Slide the POWER switch to PLAYER. (2) Set EDIT mode to ON in the menu system to minimise the
picture deterioration (p.25).
@ EXECUTE
©
oN, : Signal flow
Starting Editing
(1) Insert a blank tape (or a tape you want to record over) into the recording VCR. Then insert your
recorded tape into the camcorder. {2) Play back the recorded tape on the camcorder until you locate the
point where you want to start editing. Then set the camcorder to playback pause mode. (3) Set the
recording VCR to recording pause mode. (4) Press 88 on the camcorder and VCR simultaneously to start
editing.
To Edit More Scenes
Repeat steps 2 to 4.
To Stop Editing
Press C) STOP on the camcorder and VCR. When you finish editing, reset EDIT mode to OFF (p.25).
Use of the EDITSEARCH button
To play back a tape in the forward or reverse direction keep pressing EDITSEARCH during playback
pause. You can play back still pictures successively at specific intervals by pressing EDITSEARCH
intermittently.
adey saypjou ouo 3unipa /ssuTas apo] ayy SuISueY7 Sm
Note on DISPLAY function
If you have displayed the viewfinder screen indicators on the TV (DISPLAY function), erase the
indicators by pressing DISPLAY on the Remote Commander so that they will not be superimposed on
the edited tape.
29