Dscp Translation - Planet Networking & Communication IGS-6329 Series User Manual

4.5.4.3 DSCP Translation

This page allows you to configure the basic QoS DSCP Translation settings for all switches. DSCP translation can be done in
Ingress or Egress. The DSCP Translation screen in
The page includes the following fields:
Object
• DSCP
• Ingress
• Translate
• Classify
• Egress
•
Remap DP
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
Figure 4-4-4-3
Figure 4-5-4-3: DSCP Translation Page Screenshot
Description
Maximum number of supported DSCP values are 64 and valid DSCP value
ranges from 0 to 63.
Ingress side DSCP can be first translated to new DSCP before using the DSCP
for QoS class and DPL map.
There are two configuration parameters for DSCP Translation –
■
Translate
■
Classify
DSCP at Ingress side can be translated to any of (0-63) DSCP values.
Click to enable Classification at Ingress side.
There is following configurable parameter for Egress side -
■
Remap
Select the DSCP value from select menu to which you want to remap. DSCP
value ranges form 0 to 63.
285
appears.