Buttons
: Click to add a new MAC-based VLAN entry.
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
Auto-refresh
: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the page immediately.
: Updates the table starting from the first entry in the MAC-based VLAN Table.
: Updates the table, starting with the entry after the last entry currently displayed.
4.3.7.2 IP Subnet-based VLAN
The IP subnet to VLAN ID mappings can be configured here. This page allows adding, updating and deleting IP
subnet to VLAN ID mapping entries and assigning them to different ports.
The displayed settings are:
Object
• Delete
• IP Address
• Mask Length
• VLAN ID
• Port Members
Description
To delete a mapping, check this box and press save. The entry will be deleted in
the stack.
Indicates the subnet's IP address (Any of the subnet's host addresses can be
also provided here, the application will convert it automatically).
Indicates the subnet's mask length.
Indicates the VLAN ID the subnet will be mapped to. IP Subnet to VLAN ID is a
unique matching.
A row of check boxes for each port is displayed for each IP subnet to VLAN ID
mapping entry. To include a port in a mapping, simply check the box. To remove
or exclude the port from the mapping, make sure the box is unchecked. By
default, no ports are members and all boxes are unchecked.
157