Lacp Internal Port Status - Planet Networking & Communication IGS-6329 Series User Manual

4.3.2.6 LACP Internal Port Status

This page provides a status overview for the LACP internal (i.e. local system) status for all ports. Only ports that are part of an
LACP group are shown.
Object
• Port
• State
• Down:
• Active:
• Standby
• Key
• Priority
• Activity
• Timeout
• Aggregation
• Synchronization
• Collecting
• Distributing
• Defaulted
• Expired
Buttons
: Click to refresh the page immediately.
Auto-refresh : Automatic refresh occurs every 3 seconds.
Figure 4-3-2.6: LACP internal Port Status Page Screenshot
Description
The switch port number.
The current port state:
The port is not active.
The port is in active state
The port is in standby state.
The key assigned to this port. Only ports with the same key can aggregate
together
The priority assigned to this aggregation group.
The LACP mode of the group (Active or Passive).
The timeout mode configured for the port (Fast or Slow).
Show whether the system considers this link to be "aggregateable"; i.e., a
potential candidate for aggregation.
Show whether the system considers this link to be "IN_SYNC"; i.e., it has been
allocated to the correct LAG, the group has been associated with a compatible
Aggregator, and the identity of the LAG is consistent with the System ID and
operational Key information transmitted.
Show if collection of incoming frames on this link is enabled.
Show if distribution of outgoing frames on this link is enabled.
Show if the Actor's Receive machine is using Defaulted operational Partner
information.
Show if that the Actor's Receive machine is in the EXPIRED state.
133