Table of Contents
Advertisement
0.pool.ntp.org
l
1.pool.ntp.org
l
2.pool.ntp.org
l
3.pool.ntp.org
l
Click Apply to save the time settings.
Upgrade Firmware pane to install the latest version of the firmware on your device, or to reinstall the
l
firmware if it becomes corrupted. For more information, see
Certificates pane to manage the certificates used by the ACC ES Admin Web UI and the device. For
l
more information, see
Monitoring the Storage Drive State
On the Storage panel you can view the storage capacity of the device and the status of the storage drive on
ACC ES 4- and 8-port appliances (or drives on older 4-port ACC ES appliances).
Click Storage on the navigation bar to open the Storage panel. You can perform any of the following actions
in the pane in the Storage panel:
To...
View the capacity and status of the
storage drive.
View details about the drive.
Connecting the Device to Users and Cameras
On the Network panel, you can change network connections of the device. Two network connections are
supported: one for a corporate network and one for a camera network.
Note: The corporate network and the camera network must be on different IP subnets.
The corporate network is the network that typically provides users with access to the device. Users who
Monitoring the Storage Drive State
Managing Certificates on
page 24.
Do this...
When the device is:
Correctly working, Ready and
l
Not correctly working, Error and
l
1. Click the
storage details pane.
2. Click the
model and serial numbers.
Upgrading the Firmware on
is displayed.
is displayed.
in the upper right of the pane to open the
to display details about the drive, including its
page 27.
14
Advertisement
Table of Contents
