Viewing Poe Port Status - Motorola Avigilon ACC VMA-ENVR1-8P4 User Manual

To log in to and out of the ACC ES Admin Web UI:
1. To log in, enter the ACC ES Admin Web UI username and password.
The username is always administrator. Use the password you configured when you logged in to
the device for the first time. For more information, see
page 5.
The ACC ES Admin Web UI launch page is displayed in your web browser.
2. To log out of the ACC ES Admin Web UI, click the log out icon on the right side of the top banner.
On the ACC ES Admin Web UI launch page, Dashboard is selected in the side navigation bar, and the
Dashboard status panels are displayed:
ACC Server — Displays Running when the ACC Server software is operating; otherwise it displays
l
Stopped. The panel provides technical information about the device: site name, server name, server
ID, server version, software version, the number of available camera channels, and the maximum
number of ACC client instances allowed.
System — Displays Ready when the device is fully operational, and Rebooting then Initializing when
l
the device is restarting. The panel provides technical information about your device: product name,
part number, serial number, and firmware version.
Use the menu options under Services and System in the Dashboard navigation bar to access all the other
web interface panels.
Services — Expand ACC in the left sidebar to navigate to
l
The Server page to control the ACC Server on the device. See
l
Storage on the next page
The Logs page to view ACC Server service logs. See
l
page 12.
System — Access the five options to configure the device and view its status:
l
Device. See:
l
Rebooting the Device and Managing Device Settings on page 12
l
Upgrading the Firmware on page 27
l
Managing Certificates on page 24
l
Storage. See
l
Network. See
l
Logs. See
l

Viewing PoE Port Status

The PoE panel displays a status for each port in the Status column. Statuses include the following:
Green Powered
High
Viewing PoE Port Status
Monitoring the Storage Drive State on
Connecting the Device to Users and Cameras on
Providing Device Logs for Support on page 17
A PoE device is connected to the port and is operating normally.
PoE+ is turned on.
Installing and Connecting the Hardware on
Managing ACC Services and
Providing Service Logs for Support on
page 14.
page 14.
10