Installation; Before You Begin; Clearing The Hard Drive - Motorola DCH3416 Installation Manual

3 INSTALLATION

Before You Begin

Before you move or change components on the subscriber's entertainment system:
•
Review the installation instructions.
•
Determine if you are connecting to a standard analog NTSC TV (supporting an RF
input), a composite (baseband) video input, or an S-Video input) or a High-Definition
TV (supporting component video input, HDMI input, or an IEEE-1394 input).
•
Determine if the subscriber has other equipment to be connected to the terminal
(home theater or A/V receiver, VCR, etc.)
•
Verify that you have the necessary cables and other required items.
•
If the terminal was previously used, clear its hard drive before installing it at a new
subscriber location

Clearing the Hard Drive

On a previously-used cable terminal, delete all recorded programs from the hard drive
before installing it at a new subscriber location. This prevents your new subscriber from
viewing programming they may not have purchased or may not want to see.
To prevent subscribers from accidentally deleting all of their recorded programs, a
specific set of keystrokes is required to clear the hard drive. Having a TV connected is
optional.
To clear the hard drive:
1. Start the diagnostics as described in the
front-panel display.
2. Using a remote control, within five seconds, press
. (On some remote controls, the
LIVE TV
3. If you correctly enter this key sequence in five seconds or less, the hard drive is
cleared and the front-panel displays Clr.
4. If Clr is not displayed, re-enter the key sequence in step 2.
5. If Clr is displayed, press any other key to reset the terminal, turn it off, and complete
the clearing process.
Diagnostics section; d 01 is displayed on the
REPLAY
key may be labeled
MY DVR
9
, three times, and
MY DVR
.)
LIST