Appendix B - Providing Adequate Airflow To Your Maevex Device - Matrox Maevex 6152 User Manual

Appendix B – Providing adequate airflow
to your Maevex device
Maevex 6152 Decoder, Maevex 6152 / 6150 Encoder, Maevex 6122 / 6120 Encoder, Maevex 5150
Encoder, and Maevex 5150 Decoder – Because your device disperses heat, it requires adequate airflow
to ensure proper operation and to prevent damage. The following provides guidelines for effective
airflow around your device.
 Leave the proper amount of room around your device – To prevent airflow restriction,
we recommend allowing at least 0.75 inches (1.91 cm) of clearance between the top of
your device and anything above it. More space may be required depending on your
environment.
When your device is resting on a plain surface, make sure your device is resting on the
original rubber feet. If your device is being rack mounted, remove the rubber feet.
Operate your device in a well ventilated location – Don't operate your device near a heat

source or restrict airflow to your device (for example, by operating your device inside a
desk cabinet).
Monitor your ambient temperatures – Make sure the ambient temperature doesn't

exceed the maximum recommended temperatures.
For more information on supported operating temperatures, see "Environmental", page
Matrox Maevex Series – User Guide 69
62.