Validating Your Maevex Setup; Description Of Leds - Maevex 6100 Series - Matrox Maevex 6152 User Manual

Validating your Maevex setup

After connecting your Maevex devices, we recommend you validate your connection setup and
network discovery before you continue.
Description of LEDs – Maevex 6100 Series
The LED on your Maevex device provides information to help you troubleshoot your Maevex 6100
Series product. The following describes the LED on your Maevex device.
Maevex 6152 decoder, 6152 encoder, 6150 encoder, 6122 encoder, or
6120 encoder
LED color
No LED (black)
Green (standby)
Green (solid)
Green (slow blink)
Green (fast blink)
Amber (solid)
Amber (slow blink)
Amber (fast blink)
Red (solid)
6152 decoder, 6152 encoder, 6150 encoder, 6122 encoder,
or 6120 encoder
Device isn't powered.
Device is turned off but is powered.
Device is active.
Device is rebooting.
Configuration reset in progress.
Device is in maintenance mode.
Device is restarting and is in maintenance mode.
Device is updating the firmware.
Device has detected a fatal error. Try rebooting your device. If,
after restarting your device, the LED is still red, contact your
vendor for technical support
74).
(see "Customer support", page
Matrox Maevex Series – User Guide 41