Hardware Reboot Or Configuration Reset - Matrox Maevex 6152 User Manual

Hardware reboot or configuration reset

Maevex 6152 decoder, 6152 encoder, 6150 encoder, 6122 encoder, or
6120 encoder
 Hardware reboot – Press and hold the
paper clip for less than 2 seconds (until the LED turns slow blinking green) to reboot your
device.
 Configuration reset – Press and hold the
paper clip for 5 seconds (until the LED turns fast blinking green) to reboot your device
and restore the default settings.
Maevex 6100 PCIe encoder card
Hardware reboot – Quickly press the button to reboot your device.

 Configuration reset – Press and hold the button for 4-5 seconds (until the LED turns fast
blinking green
* Maevex 6100 encoder only
pressing the button on your device.
46 Matrox Maevex Series – User Guide
*
) to reboot your device and restore the default settings.
–
If, after performing a configuration reset, the LED turns amber, reboot your encoder by quickly
button on your device with the tip of a
Reset
button on your device with the tip of a
Reset