Table of Contents
Advertisement
Description of LEDs – Maevex 5100 Series
The LED on your Maevex device provides information to help you troubleshoot your Maevex 5100
Series product. The following describes the LED on your Maevex device.
Maevex 5150 encoder and 5150 decoder
The power LED (
of your unit. The following describes the power LED on your Maevex unit.
LED color
No LED (black)
Green/Red (flashing)
Green
Green (flashing)
Red (flashing)
Red
Amber
Amber (flashing)
Network connector
The network connectors on your product use indicator lights (LEDs) to
provide information on the network activity and presence. The following
describes the different network connector LEDs.
LED color
No LED (black)
Green (flashing)
Orange
) on your Matrox Encoder or Decoder unit provides information on the status
5150 encoder
Unit isn't powered.
Unit is initializing.
Unit is ready.
Encoding and streaming.
No valid audio/video input
signal detected.
Fatal error detected.
Unit reset to factory default.
Unit requires maintenance.
Configuring or updating
firmware.
Network activity
No data transfer in progress
or no network detected.
Data transfer in progress.
—
5150 decoder
Unit isn't powered.
Unit is initializing.
Unit is ready.
Decoding network stream.
Unit isn't in use.
Fatal error detected.
Unit reset to factory default.
Unit requires maintenance.
Configuring or updating
firmware.
Network
activity
Network presence
No communication
established.
—
Network communication
established.
Matrox Maevex Series – User Guide 43
Network
presence
Advertisement
Table of Contents
