Connecting Your Maevex 6100 Encoder; Description Of Supported Connections - Matrox Maevex 6152 User Manual

Connecting your Maevex 6100 encoder

Connection overview

Description of supported connections

Connector
HDMI
Network (RJ-45)
Note:
mini HDMI connectors must respect the maximum width (0.551 inches/14 mm) and
thickness (0.331 inches/8.4 mm) stated in the HDMI specifications.
Your Matrox card is now installed and connected. Restart your system and install your Matrox
software (see "Installing Matrox PowerStream Plus software", page
34 Matrox Maevex Series – User Guide
Mini HDMI to HDMI
Description
Attach your mini HDMI to HDMI cable to your Matrox card. Connect
the other end of the cable to your video device.
Note: To use this connector, you need a shielded HDMI cable. If your
video source uses a display resolution higher than 720p60, we
recommend you use a certified high-speed HDMI cable.
Connect your network cable to your Matrox card to stream to an IP
network.
To connect to the bracket of your Matrox product, the overmold (or boot) of the
Network cable
cables (RJ-45)
48).