Table of Contents
Advertisement
Programmable buttons
You can assign a button (labeled
PowerStream Plus software. You can also control the local preview using a button.
LED color
No LED (black)
Blue (solid)
Blue (blinking)
For more information on assigning a button and enabling modules, see the Matrox PowerStream Plus
user guide.
LCD control buttons
Note:
power-on, configuration reset, or reboot, or after the last push of the LCD control buttons.
In power saving mode, the LED of the LCD control buttons is solid blue.
The
and
(
)
(
24 Matrox Maevex Series – User Guide
,
,
,
1
2
3
Description
Button isn't assigned.
OR
Button is assigned, but no PowerStream Plus module is set to
Enable
assigned to a button are set to
Button is assigned, and all PowerStream Plus modules are set
to
Enable
Button is assigned, but some of the modules are set to
and some are set to
press the button that's blinking.
The LCD goes into power saving mode approximately 10 minutes after the last device
buttons enable you to access the LCD display and scroll through a list of messages.
)
) to a module (
input,
4
HDMI
. In PowerStream Plus, make sure all the modules
.
Disable
, or
Streams
Recordings
.
Enable
. To synchronize your modules,
) in your
Enable
Advertisement
Table of Contents
