Speed - JRC JMA-5204 Instruction Manual

5.4.6 Speed

Set a speed difference between targets to be identified as one target.
Targets that are within the set speed range will be identified as one target.
Procedure 1
2
Press the [TT menu] key.
Press the following buttons.
3 Target setting
1 Association assessment setting
6 Speed
Set a speed difference between a tracked target and an AIS target to be identified as one
target. Set the speed range between 0 and 99 kn.
A smaller speed range means a stricter condition.
The possibility of mistakenly identify resembling targets will be lower, but targets are less
likely to be identified as one target.
A larger speed range means a looser condition.
Targets are likely to be identified as one target, but targets with similar parameters are
likely to be mistakenly identified.
Adjust the setting in accordance with the intention.
57