JRC JMA-5204 Instruction Manual page 470

Message
Radar Alarm(In)
Radar Alarm(Out)
Route(Approach)
Route(Break Off)
WPT(Arrival)
WPT(Break Off)
ALR No: Unique alarm number in ALR sentence and ACK sentence.
Table 9-5 List of Operational Error Messages and Warnings
Message
Can't Transmit
Card Full
Delete Failed
Format Failed
In Use
In Use
Invalid Card
Invalid Data
MAX Point
No Card
No Position Data
No Heading Data
Not Allowed
Out of Bounds
Out of Bounds
Out of Range
Read Failed
Write Failed
ALR No: Unique alarm number in ALR sentence and ACK sentence.
Table 9-4 List of Route Error Messages and Warnings
Class
Alarm Targets have entered the radar alarm range.
Alarm Targets have left the radar alarm range.
Alarm Approach the route.
Alarm Out of the route.
Alarm Arrive at way point.
Alarm Out of the way point.
Class
Transmission cannot be executed.
INFO Tried to transmit within 5 second after standby or when the
transmitter-receiver has any trouble.
INFO Card capacity insufficient.
INFO Data deletion from the card failed.
INFO Card format failed.
INFO Data cannot be deleted / changed because it is being used now.
INFO Data has been inputted.
INFO Card is not valid.
The value is invalid.
INFO
Tried to enter any data beyond its range.
The maximum number of points has been reached.
INFO
Tried to enter navigation information beyond the specified.
INFO Card not detected yet.
There is no position data.
INFO
Mark or line input when the latitude and longitude is invalid.
There is no bearing data.
INFO Target tracking operation or TM selection when bearing data is
invalid.
INFO General operation error.
INFO The latitude cannot be displayed on the map.
INFO The latitude is outside the displayable latitude range.
INFO Out of operation range.
INFO Data load from the card failed.
INFO Data write to the card failed.
Description
Description
9 3
ALR No.
933
934
938
939
936
937
ALR No.