Tt Operation - JRC JMA-5204 Instruction Manual

5.2

TT OPERATION

This section explains how to use the target tracking (TT) functions.
Each function is available only when the target tracking (TT) option is installed.
The functions automatically track a target, and store/display vectors as the course and speed.
They calculate CPA and TCPA, and issue an alarm.
The target tracking (TT) function can track up to 30 ships.
Automatic acquisition/activate zone can be set for automatic acquisition.
When the power is turned off or the transmit/standby mode is activated, tracking data is erased from memory.
Use
The
the operator him/herself.
Making the final navigation decision based only on the
radar
or running aground.
Use
The final navigation decision must always be made by
the operator him/herself.
Making the final navigation decision based only on
tracking target information may cause accidents.
Tracking target information such as vector, target
numerical
Also, targets that are not detected by the radar cannot
be acquired or tracked.
Making the final navigation decision based only on the
radar display may cause accidents such as collisions or
running aground.
Caution
the
radar only as a navigation aid.
final
navigation decision must always be made by
display
may cause accidents such as collisions
target
tracking function only as a navigation aid.
data, and alarms may contain some errors.
17