Deactivating Ais Targets (Deactivate Ais) - JRC JMA-5204 Instruction Manual

5.3.5 Deactivating AIS Targets (Deactivate AIS)

Deactivate an AIS target
The operation above is effective only for active
targets.
Procedure 1
2
Alternative 1
2
*2 For deactivation of targets, refer to "Types and Definitions of AIS Target Symbols" in Section 5.1.2
"Definitions of Symbols."
*2
and clear the display of the vector and HL.
Attention
Press the CURSOR
several times until
The cursor mode is set to the deactivation mode.
Move the cross cursor mark onto the active AIS target that is to be
*2
deactivated , and press [ENT] key.
The selected AIS target will be deactivated
Press the CURSOR button at the upper right of the radar display
several times until
The cursor mode is set to the AIS activation mode.
Move the cross cursor mark onto the inactive AIS target that is to be
*1
activated , and press [CLR/INFO] key.
The selected AIS target will be deactivated
button at the upper right of the radar display
CANCEL appears.
*2
.
ACT AIS appears.
*2
41