Microtek XT7000 HS User Manual page 20

5. Click the Show Preview Window and Show Setting Window tabs in the
6. Click the Preview button to perform a preliminary view of the entire image.
7. Go to the "General" panel by clicking the General tab in the Settings
8. If necessary, go to the "Image Process" panel by clicking the Image Process
20 XT7000 HS Scanner User's Manual
c) Select a dimension in the Paper Size as
your preview image size.
d) Select a desired resolution in the
Resolution for your image output
resolution.
e) If necessary, select "Text Orientation
Recognition" in the Rotate to ensure
the scanned images in a readable
orientation. When it is selected, you
can select the preferred language
used as an identification in the options
menu
f) If "Auto-crop" & "Auto-deskew" is selected, the scanner automatically
detects the size of the original image, crops the full scan frame to fit the
image, and removes unwanted black borders after the scan, as well as
corrects the distorted image for proper alignment.
Scan Setup interface to display other interfaces which are helpful for your
scanning processing.
When done, a preview image appears in the Preview window.
window. Specify the settings for your requirements there.
Select the image type in the Document Type as your input image type.
a)
– Select Photo to scan color
prints.
– Select Text to scan text.
b) If necessary, check "Remove Blank Page" and "Remove Punch Hole" to
enhance the quality of the scanned images.
tab in the Settings window. Use the image correction tools presented there
to enhance the image quality according to your specific requirements.