Table of Contents
Advertisement
Set the time period
to start scanning
automatically when the
scanner lid is closed and
detected by the sensor.
Set the time period to stop
the automatic scan
7. Click the Open Folder button to locate the scanned images if you want to
26
XT7000 HS Scanner User's Manual
b)
Click the Normal Scan button in the Main interface. An "Automatic
Detection" window appears on the screen.
If necessary, adjust slider bars to increase/decrease the value of user
settings for the "Responding Time" and "Stop the Auto Scan after..."
options.
c)
Place the document to be scanned facing
down on the scanner's glass surface, and
then close the scanner lid.
Once the scanner lid is down and
detected by the sensor, the scanner will
start scanning automatically based on
a predefined Responding Time set up
previously.
NOTE: Make sure that scanner lid is closed
and fully covers the scan bed; otherwise
the automatic scan will not be performed
correctly.
d)
When done, if you want to scan more pages, 1) raise the scanner lid
and remove the document; 2) then, place the next document on the
scanner's glass surface and close the scanner lid.
If you want to stop the automatic scan task, just click the Stop button
to exit the window.
e)
Repeat the step c) until you finish scanning all desired documents.
When done, the scanned images will be automatically saved into the folder
defined in the File Location menu box. At the same time, the scanned
images will be displayed in thumbnail sizes in the Thumbnail View window
and labeled with the chosen file format.
view.
Advertisement
Table of Contents
