Installing The Rear Wheel - KTM 690 SMC R EU 2015 Owner's Manual

13 WHEELS, TIRES
13.4

Installing the rear wheel

Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
Warning
Danger of accidents No braking effect when operating the rear brake.
–
After installing the rear wheel, always operate the foot brake until the pressure point is reached.
–
Pull out wheel spindle
with the adjusting screw.
–
Push the rear wheel forwards as far as possible and take the chain off the rear sprocket.
Info
Cover the components to protect them against damage.
–
Pull out the wheel spindle.
Warning
102001-01
Danger of accidents Reduced braking effect caused by damaged brake discs.
–
–
Take the rear wheel out of the swing arm.
Info
Do not operate the foot brake when the rear wheel is removed.
 to the point where the chain adjuster is no longer in contact
Always lay the wheel down in such a way that the brake discs are not dam-
aged.
104