Table of Contents
Advertisement
13
WHEELS, TIRES
Preparatory work
–
Raise the motorcycle with the rear wheel stand. (
–
Remove the rear wheel.
Main work
–
Check bearing
»
If the bearing is damaged or worn:
–
Replace the bearings.
–
Check rubber dampers
»
If the rubber dampers of the rear hub are damaged or worn:
–
Change all rubber dampers in the rear hub.
102004-10
–
Lay the rear wheel on a workbench with the rear sprocket facing upwards and insert the
wheel spindle in the hub.
–
To check play
hand.
Info
Measure the play on the outside of the rear sprocket.
Play in rubber dampers, rear wheel
102005-10
»
If play
–
Change all rubber dampers in the rear hub.
Finishing work
–
Install the rear wheel.
–
Take the motorcycle off of the rear wheel stand. (
(
p. 103)
.
of the rear hub for damage and wear.
, hold the rear wheel tight and try to rotate the rear sprocket with your
is larger than the specified value:
(
p. 104)
p. 70)
≤ 5 mm (≤ 0.2 in)
p. 71)
107
Advertisement
Table of Contents
