Checking The Basic Position Of The Shift Lever; Adjusting The Basic Position Of The Shift Lever - KTM 690 SMC R EU 2015 Owner's Manual

16 TUNING THE ENGINE
16.2

Checking the basic position of the shift lever

A 0 0 0 A
16.3

Adjusting the basic position of the shift lever

–
Position the Map‑Select switch in the holder.
–
Slide the Map‑Select switch with the holder downward onto the retaining bracket.
Finishing work
–
Mount the seat. (
–
Sit on the vehicle in the riding position and determine distance
edge of your boot and the shift lever.
Distance between shift lever and upper
edge of boot
» If the distance does not meet specifications:
–
Adjust the basic position of the shift lever.
400692-10
–
Remove screw
401950-12
p. 75)
 
and take off shift lever

between the upper
10... 20 mm (0.39... 0.79 in)
( p. 142)
.
142