KTM 690 SMC R EU 2015 Owner's Manual page 107

13 WHEELS, TIRES
Main work
–
Check the rear hub rubber dampers.
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Replace the wheel bearing.
–
Remove bushing
seal ring 
Long-life grease (
–
Mount the bushing.
–
Clean and grease the threads of the wheel spindle and nut
102002-10
Long-life grease (
–
Mount the rubber damper and rear sprocket carrier in the rear wheel.
–
Position the rear wheel.
The brake linings are correctly positioned.
(

. Clean and grease the roll surfaces of the bushing and the shaft
.
p. 186)
p. 186)
p. 106)
 .
105