Table of Contents
Advertisement
13
WHEELS, TIRES
–
Clean and grease the thread of the wheel spindle and screw
Long-life grease (
–
Lift the front wheel into the fork, position it, and insert the wheel spindle. Mount and
tighten screw
Guideline
Screw, front wheel spindle
–
Position wheel speed sensor
101997-10
Guideline
Remaining screws, chassis
–
Position the brake caliper and check that the brake linings are seated correctly.
–
Position spacers
–
Operate the hand brake lever repeatedly until the brake linings are in contact with the
brake disc and there is a pressure point. Fix the hand brake lever in the activated posi-
tion.
The brake caliper straightens.
–
Tighten screws
Guideline
Screw, front brake caliper
–
Remove the fixation of the hand brake lever.
p. 186)
.
in the drill hole. Mount and tighten screw
. Mount screws
but do not tighten.
.
M10x1.25
.
M24x1.5
45 Nm
(33.2 lbf ft)
M6
10 Nm (7.4 lbf ft)
45 Nm
Loctite
(33.2 lbf ft)
102
.
®
243™
Advertisement
Table of Contents
