Charging The Rechargeable Battery Using The Mca 800 Charging Adapter - Sennheiser Set 860 Instruction Manual

Using additional functions
40 | Set 860
Charging the rechargeable battery using the
MCA 800 charging adapter
If you have purchased an additional stethoset receiver and/or
an optional MCA 800 charging adapter, you can also charge
the stethoset receiver using the charging adapter.
WARNING
Interference due to magnetic fields!
The MCA 800 charging adapter generates stronger permanent
magnetic fields that could cause interference with cardiac
pacemakers, implanted defibrillators (ICDs) and other
implants.
b
Do not use the MCA 800 charging adapter if you are wearing
a cardiac pacemaker, implanted defibrillator or other
implant.
1 Select a suitable country adapter and slide it onto the
power supply unit until it clicks audibly into place.
2 Connect the connector of the power supply unit to the con-
nection socket of the MCA 800 charging adapter.
3 Plug the power supply unit into the wall socket.
Connect the charging adapter to the charging contacts on
4
the stethoset receiver. The charging adapter is magneti-
cally oriented to the correct position.
The rechargeable battery is being charged. The LED on the
charging adapter lights up red. When the rechargeable bat-
tery is fully charged, the LED lights up green.
1
US
EU
UK
AU
3 4
You can also use the stethoset receiver during charging.
Note, however, that the receiver can get slightly warm
during charging. The charge status of the rechargeable
battery is displayed on the transmitter (see page 15).
If the LED on the charging adapter flashes red and green, a
charging error/battery error has occurred. In this case, dis-
connect the charging adapter from the receiver. More informa-
tion on the rechargeable battery can be found on page 31.
2
3 h
100 %