Sennheiser Set 860 Instruction Manual page 43

Problem Possible cause
The stethoset receiver is not
paired with the transmitter.
The stethoset
The distance to the transmitter
receiver does
is too large.
not connect to
the transmitter
4 stethoset receivers are cur-
rently connected to the trans-
mitter.
Possible solution
Pair the stethoset receiver with the
transmitter.
Reduce the distance between the
stethoset receiver and the trans-
mitter.
Up to 4 stethoset receivers can be
simultaneously used with the
transmitter.
If a problem occurs that is not listed in the above table or if the
problem cannot be solved with the proposed solutions, visit
the Set 860 product page at www.sennheiser-hearing.com.
There you will find a current list of frequently asked questions
(FAQ).
You can also contact your Sonova Consumer Hearing partner
for assistance. You can find your local Sonova Consumer Hear-
ing partner at www.sennheiser-hearing.com/service-support.
If a problem occurs ...
Page
32
–
–
Set 860 | 43