Sennheiser Set 860 Instruction Manual page 37

b
Save the setting by disconnecting the transmitter from the
power supply system (see page 35).
Settings protection function
The settings protection function prevents accidental adjust-
ment of the hearing profile and the balance setting (this pro-
tection function is saved on the
between stereo and mono operation on the transmitter is no
longer possible (this protection function is saved on the
mitter).
b
Make sure that your stethoset receiver's balance setting
and hearing profile are correctly adjusted (see page 23 and
24) and that the transmitter is set to stereo or mono opera-
tion as desired (see page 34).
b
Make sure that the protected settings mode is activated
(see page 35).
b
Place the stethoset receiver into the transmitter's charging
compartment.
b
Press the volume button
vate the settings protection function.
Status and display of
the settings
protection function
activated
nd
2 LED segment lit
deactivated*
nd
2 LED segment off
b
Save the setting by disconnecting the transmitter from the
power supply system (see page 35).
Using additional functions
stethoset receiver). Switching
+ on the stethoset receiver to acti-
Function/behavior
The activated hearing profile and the
balance setting for the stethoset
receiver cannot be changed/deacti-
vated. Switching between stereo and
mono operation on the transmitter is
not possible.
The hearing profiles can be changed
at any time (see page 24), the
balance setting can be changed (see
page 23) and you can switch
between stereo and mono operation
(see page 34).
* factory default setting
trans-
Set 860 | 37