Sennheiser Set 860 Instruction Manual page 29

Cleaning and maintaining the
Set 860
CAUTION
Liquids can damage the electronics of the product!
Liquids entering the housing of the product can cause a short-
circuit and damage the electronics.
b
Keep all liquids far away from the product.
b
Do not use any solvents or cleansing agents.
To clean the wireless headphone system:
b
Switch your wireless headphone system off and disconnect
the transmitter from the wall socket before cleaning.
b
Clean the product only with a soft, dry cloth.
b
Clean the charging contacts on the stethoset receiver and
in the charging compartment from time to time using e.g. a
cotton swab.
To clean the ear pads:
b
Reach behind the ear pads with your fingernails so that you
can carefully detach the ear pads from the stethoset
receiver.
b
Clean the ear pads under lukewarm running water.
b
Let the ear pads air dry at room temperature for at least
12 hours before using them again.
b
Put the ear pads back on the stethoset receiver.
The rubber ring of the ear pads locks into place on the ste-
thoset receiver.
Cleaning and maintaining the Set 860
Set 860 | 29