About The Display - Planar Dome E2 User Manual

About the Display

The Dome EX display system is designed for medical imaging in
diagnostic settings, in portrait or landscape orientation, and comes
fully tuned with gamma correction that complies with the DICOM
Part 14 Standard. The all-digital design enables the display to produce
the sharp, crisp images critical to softcopy medical viewing.
Use the MX2 display controller to install one or two Dome E2 displays.
Install one or two Dome E3 displays using the MX3 display controller.
Bundled with the display system, the Dome CXtra software enhances
the functionality of the Dome EX display with a range of value-added
services, such as DICOM calibration, error reporting, and backlight
saver. Network management of Dome displays running the Dome
CXtra software requires the Enterprise Management Service for
Dome CXtra. For more information, refer to Dome CXtra User's Guide.
System Requirements
• PCI slot (64-bit recommended)
• 50 MB hard disk space
• 256 MB RAM
• CD-ROM drive
• Power supply, 350 watts or greater
• Windows XP Service Pack 1 or
Windows 2000 Service Pack 4
• .NET Framework 1.1