About The Display - Planar Dome C3i/EX User Manual

About the Display

The Dome CX/Dome EX display systems, ranging from 2 to
5 megapixels, consists of a TFT LCD panel and a display board and
driver. The display's thin film transistors, in a transmissive-type
display, use an integrated cold cathode fluorescent tube (CCFT)
backlight system.
The display is designed for medical imaging in diagnostic settings, in
portrait or landscape orientation, and comes fully tuned with gamma
correction that complies with the DICOM Part 14 Standard. The all-
digital design enables the display to produce the sharp, crisp images
critical to softcopy medical viewing. Unwanted analog display image
artifacts are eliminated.
Bundled with the display system, the Dome CXtra software enhances
the functionality of the Dome EX display with a range of value-added
services, such as DICOM calibration and error reporting. For more
information, refer to Dome CXtra User's Guide.
System Requirements
• PCI slot per board (PCI66 recommended)
• 2 MB hard disk space for installation of driver, DDX, and
documentation
• CD-ROM drive
• Solaris 2.5.1 to 10 operating system
NOTE: For users upgrading from Dome C3i to Dome EX display,
see instructions on page 5.