About The Display; System Requirements - Planar Dome E4c User Manual

About the Display

The Dome E4c display is a 30-inch AMLCD color panel designed for
widescreen diagnostic imaging. The combination of high resolution
and high contrast ratio allow the viewing of color and grayscale
images simultaneously.
Bezel-free framing of 4 megapixels of data is presented in a landscape
resolution of 2560 x 1600 pixels. Gamma correction is achieved on
this true color display from a palette of 1786 near-gray values.
The integrated Dome RightLight controller monitors and stabilizes
backlight luminance.
Use of the Dome E4c display with the MX4 graphics display controller
offers these three advantages:
• Graphics board installation for PCI slot
• Dual-display configuration (two boards required)
• Image display in portrait mode

System requirements

• PCI slot (64-bit recommended)
• 50 MB hard disk space
• 256 MB RAM
• CD-ROM drive
• Power supply, 350 watts or greater
• Windows XP Service Pack 1 or
Windows 2000 Service Pack 4
• .NET Framework 1.1