Using Ring Again - Nortel 1230 User Manual

Operating your IP Phone 1230
AutoDial
Displaying an AutoDial number
Use the following procedure to display an AutoDial number.
Display
AutoDial

Using Ring Again

Use the Ring Again feature to automatically redial the number if you
receive a busy tone, or if your called party does not answer. Your IP
Phone rings when the person you called becomes available.
98
2. Using the dialpad, dial the phone
number (including access code) to store
on the selected
3. Press the AutoDial
store the number on the selected key.
After you store a number, the word
Autodial disappears, and the stored
number appears.
4. Assign a label to the key.
After you assign the label, the number
disappears and only the label appears
on the screen next to the key.
1. Press the Display
2. Press an AutoDial
display area to display the number
associated with that key.
AutoDial key.
key a second time to
key.
key in the upper