Wall-Mounting The Ip Phone (Optional) - Nortel 1230 User Manual

Installing your IP Phone 1230
1. Plug one end of the PC Ethernet cable (not supplied) into the PC
Ethernet port on the back of your IP Phone marked with the
symbol.
2. Thread the cable through the channel in the foot stand.
3. Connect the other end of the cable to the LAN port on your computer.

Wall-mounting the IP Phone (optional)

You can install your IP Phone on a wall. Wall-mount the IP Phone using
the two keyholes on the back of the IP Phone. You do not need the foot
stand for wall-mounted applications.
1. Remove the foot stand.
2. Ensure all cables are properly routed and the IP Phone is functioning.
3. Make small marks on the wall where you want to align each keyhole
slot.
4. Insert the screws (not provided) so that they protrude slightly from the
wall.
5. Align the keyholes on the back of the IP Phone with the screws in the
wall.
6. Slide the IP Phone onto the screws to secure the IP Phone in
position.
38
(